|
Chain Plates - CP01
White Metal
These small fittings are ideal for connecting the mast &/or funnel 'stays' to the gunwales &/or deck.
Pack of 3
Price: £0.65
|
|
|
|
Coal Scuttles - CS01
White Metal
These coal-chute lids fit directly onto the deck
Dia. 5/8" / 15mm
Pack of 4
Price: £0.60
|
|
|
|
Coal Scuttles CS02
White Metal
These coal-chute lids fit directly onto the deck
Dia. 1" / 25mm
Pack of 4
Price: £1.00
|
|
|
|
Door Handles DWH01
White Metal
'Steering-wheel' type handles for water-tight doors.
dia. 1/2" /12.5mm
Pack of 3
Price: £0.90
|
|
|
|
Fire Extinguishers FE01
White-metal
These extinguishers are typical of the hand-held type.
ht. 13/16"/ 17mm
Dia 1/4" / 6mm
Pack of 2
Price: £1.40
|
|
|
|
Gas Bottle - GB01
White-Metal
!;32nd scale 15kg gas bottle
ht. 3/4" / 18mm
dia. 3/8" /9mm
Pack of 2
Price: £1.40
|
|
|
|
RDF Loop - RDF01
White Metal
Adds that finishing touch to any tug/workboat of the 40s to 80s era.
Ht. 1" /25mm
dia. 3/4" / 18mm
Pack of 1
Price: £0.49
|
|
|
|
Steering Gear SG01
White Metal
This essential piece of 'kit' is typical of the gear housing found on the rear of the engine room on tugs upto the days when the above deck engineroom disappeared.
ht. 1 1/8" / 28mm
width. 1" /25mm
Pack of 1
Price: £1.49
|
|
|
|
Tool Kit - TK01
White Metal
Essential deck equipment.......containing shovel, brush & oil can.... in 1:32nd scale
Pack 3 tools
Price: £1.60
|
|
|
|
Winch Valve Gear WVG01
White Metal
This valve gear is normally situated close to the funnel base, &/or on the deck, close to the windlass & winches... found on most tugs
Ht. 7/16" / 11mm
dia. 3/8" / 9mm
Pack of 2
Price: £0.90
|
|
|
|
Bulwark Ribs - BWR 01
ROUND Bulwark Ribs ( white-metal )
These white-metal Ribs are a first class representation of the 'round' steel bars, fitted to the stern deck of the old steam tugs, and ( mostly ) all round many modern tugs......... The ribs have a small deck-flange moulded onto the stem... the stem being longer than is required, so as to allow the modeller to cut to length to suit any scale... simple & quick to fit.
Pack 0f 10
Price: £1.60
|
|
|
'Hard' Brass Wire
'Hard' Brass Wire
Brass wire, 'Hard' so it doesn't 'kink', for stanchion railings & hand rails... available in three diameters.i.e. :-
.9mm / 1.2mm / 1.65mm ... each in 2 metre lenghts.
|
|
Choice
|
|
Fellini©
Fellini© fittings are designed & manufactured, in house, by Mobile Marine Models.
Mobile Marine Models reserve the right to alter specifications & /or prices without prior notice.
© Mobile Marine Models, The Boat Shed, Highcliffe Park, Ingham Cliff, Lincoln LN1 2YQ
tel; 01522 730731
|
