|
Power Korts ©
Seeing is Believing.............
See the Shape .............
................. Believe the Performance.
and 'it' doesn't stop THERE..... Shape & Performance is backed by precision engineering, strong construction, unique Hull Brace, ( to stop any possible vibration), and a well thought-out Tiller Arm to give precise control.
Click for Power kort Selection
|
|
|
Water is water.......
After much research into the many 'real' life prototypes ....... And, adding lots & lots of MODEL TUGNOLOGY,
.... after-all water is water & will NOT scale down ...... So what might work well in the 'real' world does not always work 'right' in the model world ....... Often the case with model korts !!! .......
......... The Mobile Marine Models POWER-KORTŠ is the answer to the 'Tugger's' pulling-power problems.
|
|
|
|
|
Cast in the ....
............. same ultra lightweight, very, very strong 'throw-it-against-the-wall-&-it'll-bounce-back' material as the rest of our HardyCast© range of fittings.
The nozzles, complete with Stainless Steel Rudder Post, running in a precision bored thick-walled brass Rudder Tube, Hull Brace and Tiller Arm, have one other unique feature only offered by MOBILE MARINE MODELS.......
.......... Angle - of - attack........................
|
|
|
The Table-Top....
.. surface of the Power Kort nozzle allows the 'modeller' to determine the ultimate 'angle - of - attack', best suited to their particular boat......
.... whilst every modeller has their own-way-of-doing-things, perhaps the best way to achieve the required angle is to 'grind' the table-top ... by, placing a sheet of glass-paper, flat on the bench, and using a figure-of-eight motion, the desired angle is quickly acquired.
|
|
|
|
|
Rudder Post Foot....
.... As with the Table-Top............
Grind the Rudder Post foot to the desired angle...........
|
|
|
Using the Ident marks ....
with REACT SuperGlue
( available from Mobile Marine Models )
... 'marry' the nozzle to the Rudder Post
|
|
|
|
|
The Hull Brace...
.. supports the thick-walled precision bored Rudder Tube within the hull.
Fitting the Tiller Arm to the Rudder Post completes the installation.
|
|
|
Full Assembly......
.. In order to get the maximum performance from your Power-Kort. it is critically important that the correct type of propeller is fitted....
click here for Selection
Mobile Marine Models recommend PropShop propellers.
|
|
|
|
Power Korts are a copyright product, designed & manufactured, in house, by Mobile Marine Models, and as such may not be copied or reproduced without the express permission of Mobile Marine Models.
Mobile Marine Models reserve the right to alter specifications & /or prices without prior notice.
© Mobile Marine Models, The Boat Shed, Highcliffe Park, Ingham Cliff, Lincoln LN1 2YQ
|
